wheel_loader_home Home page wheel_loader_bookmark Bookmark wheel_loader_contact http://www.dhsty.com/zhuliya
dot Home dot About us dot Products dot New product dot Order dot Contact dot Message
current time:
  USER ID:
 
  PASSWORD:
Register
Classification
                 Engineering machinery
                 Construction machinery
                 Agriculture machinery
                 New product loader
                 ATV
                 Loader Power
                 Machinery Tool
                 Others
Website in China
 
                Home >> Agriculture machinery >> Walking Tractor DF12L

DF12L Walking Tractor

 

Introduction:
The DONGFENG Brand Power Tiller/Two-wheel Tractor Model DF-12L is of dual-function type that can be used as a means of traction as well as drive. It is featured by its simple and compact structure,good reliability,long service life,easy operation,ample output,light weight and good cross-country ability,It is very suitable for use in paddy fields,dry fields,orchards,vegetable gardens and hilly land with a little inclination,it can be used for ploughing,rototilling,harrowing in paddy fields,harvesting,drilling,ditching,transportation and etc.if suitable farm inplements or accessories are attached.In addition,it can also be extensively used as a stationary power source for small scale drainage and irrigation,sprinkling,grain threshing,cotton ginning,flour milling,fodder cutting and so on.

Model DF-12L DF-12SL DF-12KL DF-12EL EF-12ESL
Structure weight(kg) Without rotavator 360 363 385 388 391
With rotavator 470 473 495 498 501
Working weight(with rotavator)(kg) 504 507 529 532 535
Turning speed of rototilling shaft (rpm) 188 188/300 188 188 188/300
Overall dimensions(L ´ W ´ H) (mm) 2680 ´ 960 ´ 1250 2680 ´ 1030 ´ 1250 3180 ´ 960 ´ 1250
Number of blades (pcs) 18(22) 24(28) 18(22)
Rototilling width (mm) 600 800 600
Type of tractor Single axle, dual-purpose for both traction and drive
Travelling speed (km/h) Forward 1.4, 2.5, 4.1, 5.3, 9.4, 15.3
Reverse 1.1, 3.8
Tyre size (mm) 6.00-12
Wheel track (mm) 800, 740, 640, 580(normally use 800)
Min. ground clearance (mm) 182
Min. Turning radius (m) 0.9(with no rotavator)
Model of engine S195N
Type of engine Horizontal 4-stroke
Bore ´ stroke (mm) 95 ´ 115
Total displacement (L) 0.815
Compression ratio 20:1
Turning speed of crankshaft (rpm) 2000
1-hour rated output (kw/hp) 9.30/12.65
12-hour rated output (kw/hp) 8.30/11.29
Specific fuel consumption (g/kw.h) 250
Specific lube oil consumption (g/kw.h) £ 2.00
Cooling mode Condenser(Radiator)


Tel : +86-27-87592071, 86-27-87592081, 86-27-87592091
Contact Fax : +86-27-87592096 , 86-27-87592097              
Address : Suite#4, FLoor8, HuiGuShiKong Building , #8 Forest Road East Lake, Hubei Provice, China      

CopyRight @ 2005-2008 Wuhan Gland Machinery Co., Ltd Designed MF website design Co.,Ltd

wheel_loader_4