| Tractor Parameters |
Model |
DF-500 |
DF-504 |
| Drive Type |
4×2 2WD |
4×4 4WD |
| Overall Dimensions L×W×H（mm）： |
3624×1615×1630 |
| Wheel Track（mm） |
Front |
1420（usually use）, 1520,1620 |
1420 |
| Rear |
1300,1400,1500,1600 |
| Wheel Base（mm） |
1885 |
1925 |
| Ground Clearance（mm） |
Under Front Axle |
440 |
313 |
| Under Rear Axle |
429 |
429 |
| Rated Traction Force（N） |
10000 |
13000 |
| Construction Mass（kg） |
2000 |
2200 |
| Min.Turning Radius（m） |
3.4 |
3.8 |
| Theoretical Speed(Without creeper gear（km/h) |
Forward |
1.63/0.3,2.70/0.49,3.43/0.64,5.49/1.0,4.29/0.79,7.07/1.3,9.1/ 1.67,14.4/2.64,11.26/2.07,18.57/3.41,23.88/4.38/,37.8/6.94 |
| Reverse |
4.34/0.8,7.19/1.32,9.24/17,14.63/2.69 |
| Engine Specifications |
Mobel |
CZ495T |
| Type |
4-cylinder,Upright inline cylinder,radiator cooling,4-storke cycle,direct injection |
| 12-hour Rated Power(kw/hp) |
36.8/50 |
| 1-hour Rated Power(kw) |
≤270 |
| Rated Speed（rpm） |
2400 |
| Bore×Stroke（mm） |
95×100 |
| Total Displacement（L） |
2.83 |
| Drive System |
Clutch |
Dry Linkage Type Dual-function Clutch |
| Grar Box |
（3+1）×4，plannar 3-shaft for main transmission,epicyclic gearing for sleevegear |
| Main Drive |
One Pair of Sporal Bevel Gears |
| Differential |
Bevel Gear |
| Differential Lock |
Sliding pin ,foot operated |
| Final Transmissions |
Planetary reduction gear |
| Travelling Mechanism |
Tyre |
Front |
6.00-16（Stripe Pattern） |
7.50-20 （Herringbone Pattern） |
| Rear |
12.4-28（Herringbone Pattern） |
| Steering Gear |
Circulating ball type |
| Brake |
Wet disc(Multiple) |
| Working Device |
Hydraulic System |
Lifting Capacity at 610 mm Behind Lift Point（kg） |
9381(900kg) |
| 3-Point Suspension |
Category:Ⅱ |
| P.T.O.Shaft |
Potating Speed（rpm） |
540/730, 540/1000 |
| Spline Size |
6-ф35Rectangular Spline or 8-ф38Rectangular Spline |
| Hydraulic |
Output Connector |
Quick Connector |
| Number of Connector |
2 |
| Theoretic Flow |
25.5 |
| Theoretic Pressure |
12 |
